Ladders represent a tremendous labor saver in the workplace, especially when they’re purpose-built for your industry. However, by their very nature, working with ladders also entails an element of risk because of the elevated heights that are involved. The hazards of working above the ground are magnified in many industrial settings, which makes selection of the proper industrial ladder in Stockbridge, GA, important when considering the available industrial ladders for sale.
But maintaining ladder safety in the workplace isn’t just about equipment. After all, the best made, safest ladder available could still become dangerous when proper safety procedures and practices aren’t observed. While equipment does indeed play a role in workplace safety, behavior may represent an even bigger part of maintaining a safe workplace when ladders are involved. Instituting a well-conceived workplace safety program that includes ladder protocols is a first step, followed by the creation of a safety incentive program that can motivate employees to comply. But what other measures can be taken to improve ladder safety on the job? Read on to learn more about how to improve ladder safety in the workplace.
While it’s unrealistic to think that all tasks in every industry can be done at ground level, it’s a good idea to examine your workflow to determine where ladder work can be avoided through better planning. For example, some tasks traditionally performed on a ladder at elevation could be done at ground level. By using safety-in-design and constructability principals, you can effectively limit the amount of work that must be done from a ladder.
When you think about ladder safety, the first piece of equipment you consider is probably the ladder itself. But equally as important is the state of your footwear. It’s always wise to check your shoes or boots before putting a foot on the ladder. First, make sure ladder users are wearing appropriate footwear. Never try to climb a ladder in leather-soled shoes, and wear shoes with adequate traction or lugging on the bottom to ensure a sure footing. Make sure that your shoes or boots don’t have grease or mud on them, and check to soles to see that they’re dry. You don’t want to climb a ladder with anything on that could cause you to slip and fall.
Though you may have climbed a particular ladder a thousand times, give it a quick once-over before ascending to check for defects such as cracks or breaks that could be problematic. Though it may seem overly cautious to do so, there’s no reason to tempt fate. If you see any defects or damage that could be problematic, make sure that you flag the ladder as damaged and report it so that it can be taken out of service ASAP. That way no one else is injured.
Not only should you conduct a quick inspection of any ladder before using it, but you should have a schedule in place for more thorough ladder inspections on a monthly basis. Create a schedule for inspections and log the results, as that can create a paper trail of accountability that can be examined at any time. The inspections should include things like loose or broken rungs, missing nonslip feet on ladder legs, loose bolts and rivets, cracked or degraded fiberglass, missing ID labels, and broken spreaders or locks. This will not only create a log of problems and subsequent repairs, but it will also instill confidence in the minds of all who must use the ladders.
By implementing these safety procedures and practices, you can improve ladder safety in your workplace. It’s important that, when ladders become irreparably damaged, you replace them with quality equipment from Preferred Roofing, a reputable ladder supply company in Stockbridge, GA. Then, make sure to create a program that institutes safe practices for ladder usage at work. Contact Preferred Roofing at (678) 395-6880.